top of page

Smith & Wesson Model 1000

David Peart
Nov 5
3 min read

Smith & Wesson Model 1000 Shotgun
Smith & Wesson Model 1000 Shotgun

Probably most people do not know that Smith & Wesson made sporting shotguns. These Model 1000 shotguns were made for about ten years, with production ending in 1985. They were manufactured by Howa Machinery in Japan to S&W specifications. You can read more about their history, and some other S&W shotguns, here.


This particular gun belongs to a friend. We were participating in a sporting clay charity shoot and his gun suffered some failures to feed and a few misfires from what appeared to be light primer strikes. He asked if I could fix it, of course I accepted the challenge!



My initial field diagnosis was that the failures to feed were caused by the bolt short cycling, most likely due to a leak somewhere in the gas operating system. The occasional light primer strike is probably unrelated to the gas operating system, probably resulting from a dirty action or a weak hammer spring.



Pressure compensator valve, gas piston, and piston shock absorber
Pressure compensator valve, gas piston, and piston shock absorber

Upon inspection I noted quite a bit of carbon built up on the barrel and fore end around the gas piston. I removed the fore end and barrel, and disassembled the gas operating system. I immediately saw that the pressure compensator valve was excessively worn, its piston would free float in the gas chamber an eighth of an inch or more. This excess movement would absolutely cause a drop in pressure resulting in short stroking. The compensator valve is riveted together, not designed to be repaired although in a pinch one could do so. A quick search resulted in finding a source for new valves at a reasonable price. I put one on order, along with a new piston shock absorber. The piston shock absorber in these guns have a history of deteriorating and gumming up the gas piston system. This one's shock absorber has slight wear and is serviceable, however I think a little preventative maintenance whilst working on the gas system is well worth it!



Bolt carrier, bolt, action bar sleeve, and trigger group
Bolt carrier, bolt, action bar sleeve, and trigger group
Firing pin and spring in bolt
Firing pin and spring in bolt

I suspected the occasional light primer strike was due to a weak hammer spring, or most likely just being dirty. The bolt and firing pin were surprisingly very clean, obviously well maintained. Firing pin protrusion was perfect at 0.061 in. The trigger assembly was similar - just a bit of dirt to wipe off but otherwise in very good shape. I pulled out the hammer spring and plunger, and noted just slight corrosion on the spring, and the plunger being a bit rough. I cleaned up both, and polished the plunger lightly along with the hole in the trigger plate that these parts live in. After lubing and reassembly the plunger moved easier and seemed to add more energy to the hammer's power stroke.














Original and new pressure compensator valves.  Note deteriorated polymer on old valve.
Original and new pressure compensator valves. Note deteriorated polymer on old valve.
Parts ready for reassembly
Parts ready for reassembly

Once the new pressure compensator valve arrived I cleaned up the gas piston, action bar sleeve, piston connecting ring, and inside and outside magazine tube, and barrel, paying close attention to the gas ports. With everything cleaned and lubed I reassembled the gun and performed function checks. All looked good, so I was ready to head to the range for test firing.
















Consistently good primer strikes
Consistently good primer strikes

The test firing at Arlington Sportsman's Club went very well. I fired about half a box of Remington 20g dove loads with no failures of any sort, and with solid and consistent primer strikes evident on every hull. Mission success!







This shotgun should not misbehave on the range, or out in the fields, anymore. It shoots reliably and consistently. I really enjoyed diagnosing and repairing this gun, and in the process learning more about the history of S&W shotguns. I certainly hope I come across more of these in the future!





 
 
 

Comments


bottom of page