Winchester Model 74 - Another One!

A couple of months ago I got to work on a Winchester Model 74, 22LR semi auto rifle. At the time, it was the first time I had ever seen one in real life, and I predicted I would probably not see another one of these great little rifles come across my bench again. To my surprise, I got another one to work one! This are truly sweet little rifles, I really respect how they are engineered and their simplicity. This one was built in 1941. It had been sitting for awhile, the client wanted me to go through it and make sure it is safe and reliable.

I immediately noticed on initial inspection that the trigger return spring was not working correctly. Other than that, all other functions seemed to work fine; it was just dirty and needed some TLC. The stock finish has a few blemishes, but nothing to worry about. The barrel had quite a bit of surface rust. I did not see any pitting, so it should be easy to mitigate.

I disassembled the rifle to assess all the parts and get it ready for a deep clean. Remember the non functioning trigger return spring? Turns out, the trigger return spring was missing. I was concerned about finding one for a rifle design this old, and suspected that I would have to make one from spring wire. Luckily, I did find a source for the part. I do not mind making parts if I need to. That's one reason why I have spent so many years in gunsmith training - so I can diagnose problems and build parts, and not just be another parts swapper. However, it is generally lower cost for the client if I can find new replacement parts or gently used parts instead so I always check my resources for parts first.

The only other problem I ran into was separating the two bolt halves. The firing pin spring and action spring are both captured between the front and rear bolt. They are held together by what Winchester calls 'the operating slide'. Most of us would just call it the bolt handle. Normally, one could press the two bolt halves together slightly and lever the operating slide out of engagement with the

rear bolt, hence separating the two. On this one, the operating slide would not move outward nearly far enough to disengage with the rear bolt. I ended up having to drive out the operating slide pin and removing it entirely to get the two halves to separate and continue disassembly. The level of engagement on the rear bolt was such that I wondered how the crew at Winchester assembled this gun in 1941, and also wonder if the bolt had ever been disassembled for cleaning any time in its history. As it turns out, the answer to the latter question is no; the firing pin, extractor, disassembly button, trigger transfer bar, sear, and action spring were all very dirty and gunked up. I'm glad I got it apart for a deep clean.

Everything else was very straight forward. I cleaned and lubed all of the individual parts, and started to put it all back together. The rusty barrel took just a bit of time and effort to mitigate the corrosion and polish. It turned out well. The barrel could probably benefit from re-bluing, however the expense of doing so would probably not be worth it. I will recommend to the client to keep the barrel well oiled with a high grade oil while it is stored.
I did some fitting on the operating slide to make reassembly, and future disassemblies, easier to do. I filed on the limiting pad so that it would pivot outward from the rear bolt further. This was a test-fix-test process with many iterations to make it right. I ended up taking off just a few thousandths of an inch to get it to work. Now it will disengage from the rear bolt if one applies enough outward force to the operating slide. Otherwise, it stays in solid engagement and will not pivot away on its own when firing. 'Your welcome' to the next person in line who wants to disassemble the bolt for maintenance.

I cleaned and polished the stock and butt plate, then put it all back together and performed function checks. These are truly remarkable rifles. I think it is very pretty, fits well, and shoots surprisingly well and precisely.
This morning I took it to Arlington Sportsmans Club and test fired about 15 rounds through it. Very reliable and precise, an absolute pleasure to plink with, or hunt small game. Can you tell I really like these rifles?

I am envious of my client for having such a nice old rifle. For being so old, this rifle is in remarkably good condition. It has already been around for 85 years. With a little occasional TLC it should last at least another 85 years.



Comments